Now you can calibrate and test pressure devices quickly and easily with one hand, saving valuable time. With the innovative, built-in electric pump, the Fluke 719 Electric Pressure Calibrator provides pressure calibration at your fingertips!

Use the programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals.

Pressure calibration made easy, by a name you know and trust for all your process calibration needs.

Key Features:

Electric pump for one handed pressure calibration Best in class pressure measurement uncertainty of 0.025% Measure and source mA with best in class 0.015% accuracy Precision pressure adjust vernier for accurate pressure calibration Variable release rate bleed valve for easy pressure adjustment Ideal performance for high accuracy transmitter calibration 30 PSI and 100 PSI pressure ranges Programmable pressure calibrator pump limit:   eliminates over-pressurization allows the user to program target pressures for pumping Extended pressure measurement range with any of 29 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to test valves and I/Ps Simulate mA signals to troubleshoot 4-20 mA loops Test pressure switches with built in switch test function Power transmitters during test using 24 V loop supply with simultaneous mA measurement Pressure Calibrator includes proven cleanout ports reduce pump failures

General Specifications
Storage temperature	-30 °C to 60 °C
Operating temperature	-10 °C to 55 °C
Relative humidity	95 % (-10 °C to 30 °C)  75 % (30 °C to 40 °C)  45 % (40 °C to 50 °C)  35 % (50 °C to 55 °C)
Shock	1 meter drop test
Safety	CSA C22.2 No. 1010.1:1992
EMC	EN50082-1:1992 and EN55022:1994 Class B
Size (HxWxL)	60 mm x 87 mm x 210 mm  (2.19 in x 3.41 in x 8.28 in)
Weight	912 g (2 lb)
Battery	Two 9 V alkaline batteries
Battery life	12 hours with 12 mA into 500 Ω, 200 pump cycles to 100 psi, 500 pump cycles to 30 psi
Warranty	Three-years, one year for pump

Specification:
Fluke-719 30G	Range  -12 to 36 psi, -850 mbar to 2.4 bar Resolution  0.001 psi, 0.1 mbar Accuracy  0.025 % range for 6 months  0.035 % of range for one (1) year
Fluke-719 100G	Range  -12 to 120 psi, -850 mbar to 8 bar Resolution  0.01 psi, 1 mbar Accuracy  0.025 % range for 6 months  0.035 % of range for one (1) year
mA	Range  0 to 24 mA Resolution  0.001 mA Accuracy  .015 % Rdg + 2 counts Notes  Max load, 1000 Ω, 750 Ω ohm in HART mode
Loop supply	Range  24 V dc Resolution  N/A Accuracy  ± 10 %

Pump specifications
Maximum pressure generation	120 PSI (8 BAR) (100 PSI model)
Pump to	- 30 PSI in less than 15 seconds*  - 100 psi in less than 45 seconds*  *(with 1 meter of 1/8 inch test hose)
Pump cycles between rebuilds	5000
Total pump life	20,000 calibration cycle