The complete solution to pressure calibration

The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field Error % calculation for quicker pass/fail decision making in the field Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage Min/Max/Hold to capture changing measurements Switch test feature for quicker and more accurate pressure switch testing New 1 and 300 PSI pressure ranges mean fewer extra tools required 1, 30, 100 & 300 PSI ranges now available

Technical Specifications
Standard	718 Series   Measure Pressure  (internal sensor) Accuracy  0.05% full scale Functions  zero, min/max, hold, damp Note:  Dry air, non-corrosives only     718 1G   Range:  -1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa) Resolution:  0.0001 psi, 0.001 mbar, 0.0001 kPa Over Pressure:  5x Full Scale Functions:  Zero, Min, Max, Hold, Damp     718 30G   Range:  -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa) Resolution:  0.001 psi, 0.1 mbar, 0.01 kPa Over Pressure:  5x Full Scale Functions:  Zero, Min, Max, Hold, Damp     718 100G   Range:  -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa) Resolution:  0.01 psi, 0.1 mbar, 0.01 kPa Over Pressure:  2x Full Scale Functions:  Zero, Min, Max, Hold, Damp     718 300G   Range:  -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa ) Resolution:  0.01 psi, 1 mbar, 0.1 kPa Over Pressure:  375 PSI 25 bar Functions:  Zero, Min, Max, Hold, Damp
Fluke 718 series via using 700 Series Pressure Modules	Range:  29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs Resolution:  Per pressure module specs Accuracy:  To 0.025 % of full span, per pressure module specs Functions:  Zero, Min, Max, Hold, Damp  Note: media compatibility per pressure module specs
Fluke 718 series via built in pump	Range:  -12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm Loop Power:  Range: 24 V dc  Accuracy: +/- 10 %  Note: Drive; 20 mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8 V mA Measure:  Range: 0 mA to 24 mA  Resolution: 0.001 mA  Accuracy: 0.015 % + 1 count

General Specifications
Maximum voltage	30 volts: Non-operating
Temperature	-40 °C to 60 °C
Operating Temperature	-10 °C to 55° C
Relative Humidity	95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating Altitude	3,000 M max
Shock	1 M drop test
Vibration	Random, 2 g, 5 Hz – 500 Hz
Safety	CSA C22.2 No. 1010.1: 1992
EMC	EN50082-1: 1992 and EN55022: 1994 Class B
Size	216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)
Weight	992 g (35 oz)
Power, battery life	9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery Life	4 to 20 hours typical, depending on functions used
Warranty	Three years (one year on pressure pump in Fluke 718)
Display	LCD, 5 digit pressure and current simultaneous
Note	For use with non-corrosive gasses