Accuracy and diagnostic functions for maximum industrial productivity
The new Fluke 87V has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.
The New 80 Series consists on the following models:
Fluke 83 V Industrial DMM
Fluke 87 V True RMS Industrial DMM
Fluke 87 V/E2 Industrial Electricians Combo Kit
Data logging DMM available
The 80 Series V operates very similar to the classic 80 series, but with more problem solving power, safety, convenience and impact protection.
The new 80 series V are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.
Features
New features for maximum productivity
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
Large digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models
Feature
83V
87V
True-rms ac voltage and current for accurate measurements on non linear signals
•
Selectable filter for accurate voltage and frequency measurements on motor drives
•
0.05 % dc accuracy
•
6000 counts, 3-3/4 digits
•
•
4-1/2 digit mode for precise measurements (20,000 counts)
•
Measure up to 1000 V ac and dc
•
•
Measure up to 10 A, 20 A for up to 30 seconds
•
•
Built in thermometer lets you carry one less tool (TC probe included)
•
Frequency to 200 kHz and % duty cycle
•
•
Resistance, continuity and diode test
•
•
10,000 µF capacitance range for components and motor caps
•
•
Min/Max-Average recording with Min/Max Alert to capture variations automatically
•
•
Peak capture to record transients as fast as 250 µs
•
•
Relative mode to remove test lead interference from low ohms measurements
•
•
Auto and manual ranging for maximum flexibility
•
•
Touch Hold to capture stable readings avoiding noisy signals
•
•
Large display digits and two-level bright white backlight for increased visibility
•
•
Analog bargraph for fast changing or unstable signals
•
•
Input Alert provides audible warning against wrong use of input jacks
•
•
Improved selectable sleep mode for long battery life
•
•
Access door for fast battery changes without breaking the calibration seal
•
•
"Classic" design with new removable holster with built in test lead and probe storage
•
•
Lifetime warranty
•
•
Electrical safety All inputs are protected to the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
Correctly measure pulse-width modulated motor drive signals Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the new Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.
Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals
Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
Measure AC current with an optional current clamp accessory
Compare reading from the 87V with the display on the ASD
Special shielding blocks high frequency, high-energy noise generated by large drive systems
Complex PWM drive signals are not a problem for the Fluke 87V
Pulse-width modulated detail of 50 Hz motor drive output voltage. 1000 V, 50 micro-second pulses can cause erratic behavior in some test equipment.
Specifications
Specifications
Voltage DC
Maximum Voltage:
1000V
Accuracy:
Fluke 83 V: ±(0.1%+1)
Fluke 87 V: ±(0.05%+1)
Maximum Resolution:
Fluke 83 V: 100 µV
Fluke 87 V: 10 µV
Voltage AC
Maximum Voltage:
1000V
Accuracy:
Fluke 83 V: ±(0.5%+2)
Fluke 87 V: ±(0.7%+2) True RMS
AC Bandwidth
Fluke 83 V: 5kHz
Fluke 87 V: 20kHz*
*with low pass filter; 3db @ 1kHz
Maximum Resolution:
0.1 mV
Current DC
Maximum Amps:
10A (20 A for 30 seconds maximum)
Amps Accuracy:
Fluke 83 V: ±(0.4%+2)
Fluke 87 V: ±(0.2%+2)
Maximum Resolution:
Fluke 83 V: 0.01 mA
Fluke 87 V: 0.01 µA
Current AC
Maximum Amps:
10A (20 A for 30 seconds maximum)
Amps Accuracy:
Fluke 83 V: ±(1.2%+2)
Fluke 87 V: ±(1.0%+2) True RMS
Maximum Resolution:
0.1 µA
Resistance
Maximum Resistance:
50 MΩ
Accuracy:
Fluke 83 V: ±(0.4%+1)
Fluke 87 V: ±(0.2%+1)
Maximum Resolution:
0.1Ω
Capacitance
Maximum Capacitance
9,999 µF
Accuracy
±(1%+2)
Maximum Resolution
0.01 nF
Frequency
Maximum Frequency
200 kHz
Accuracy
±(0.005%+1)
Maximum Resolution
0.01 Hz
Duty Cycle
Maximum Duty Cycle
99.9%
Accuracy
±(0.2% per khz +0.1%)
Maximum Resolution
0.1%
Temperature Measurement
Fluke 87 V, 87 V/E:
-200.0°C - 1090°C
-328.0°F - 1994.0°F
excluding probe
80 BK Temperature Probe
-40.0°C - 260°C
-40.0°F - 500°F, 2.2°C or 2% whichever is greater
Conductance
Maximum Conductance
60.00 nS
Accuracy
±(1.0%+10)
Maximum Resolution
0.01 nS
Diode
Range:
3 V
Resolution:
1 mV
Accuracy:
± (2 % + 1)
Duty Cycle Range
Accuracy:
Within ± (0.2% per kHz + 0.1 %)
Environmental Specifications
Operating Temperature
-20°C to +55°C
Storage Temperature
-40°C to +60°C
Humidity (Without Condensation)
0% - 90% (0°C - 35°C)
0% - 70% (35°C - 55°C)
Operating Altitude
2000 m
Safety Specifications
Overvoltage category
EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals
UL, CSA, TÜV, VDE listed
Mechanical & General Specifications
Size
201 x 98 x 52 mm (with holster)
Weight
355 g
Weigh With Holster and Flex-Stand
624 g
Display
Digital:
6000 counts updates 4/sec.
(Model 87 also has 19,999 counts in high-resolution mode.)
