Fluke
Home  |  Products  |  Digital Multimeters  |  
Contact us
Fluke 233 Remote Display Multimeter
The NEW Fluke 233 wireless remote display digital multimeter with removable magnetic display allows you to be 30ft away from the measurement point. Perfect for those difficult measurements where display viewing is challenging.
Fluke 233 Remote Display Multimeter
Overview Features Specifications Models and Accessories Knowledge and Information
Overview
Imagine the possibilities
What would you do if you could be in two places at once?


The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas.

  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 50 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
  • The removable magnetic display can be conveniently mounted where it is easily seen
  • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
  • Use as a conventional multimeter when the display is connected
  • Radio transmitter automatically turns off when the display is connected to the meter
  • Auto power off maximizes battery life
  • Min/Max and Average recording to capture variations automatically
  • Test continuity and diodes
  • Easy to read display with large digits and bright backlight
  • Battery life approximately 400 hours
Accuracy specifications
DC voltage
Range  0.1 mV to 1000 V
Accuracy  0.25 % + 2
AC voltage
Range  0.1 mV to 1000 V
Accuracy  1.0 % + 3
DC current
Range  1 mA to 10 A
Accuracy  1.0 % + 3
AC current
Range  1 mA to 10 A
Accuracy  1.5 % + 3
Resistance
Range  0.1 Ω to 40 MΩ
Counts
 6000
Capacitance
Range:  1 nF to 9999 μF
Resolution:  1nF
Frequency
Range:  5 Hz to 50 kHz
Resolution:  0.01Hz
Temperature
 -40 °C to +400 °C
Power
 AA batteries: Three for main body; two for display
Battery life
 400 hours
Wireless frequency
 2.4 GHz ISM Band 10 meter range
Safety rating
 CAT IV 600 V , CAT III 1000 V

General specifications
Basic features
AC true-rms  Yes
Ranging  Auto/Manual
Display
Backlight  Yes
Data storage
Min/Max/Avg  Yes
Other features
Battery type  AA alkaline
Removable display  Yes
Warranty and protection
Safety rating  CAT IV 600 V/CAT III 1000 V
External protection  Rubber overmold
Warranty  Three-years
Size (H x W x L)  5.3 cm x 9.3 cm x 19.3 cm (2.08 in x 3.6 in x 7.6 in)
Weight  604 g (1.3 Ib)

Model name Description Buy it **
Fluke 233 Remote Display Multimeter
Test leads, Probes and Clips Buy it **
 TL220
SureGrip™ Industrial Test Lead Set
 TL223
SureGrip™ Electrical Test Lead Set
 TL225
Stray Voltage Adapter Test Lead Kit
 TL71
Test Lead Set
AC72 Alligator Clip Set
Cases and Holsters Buy it **
 C116
Soft Carrying Case
 C280
Soft Case
C35 Soft Carrying Case
TPAK ToolPak, Meter Hanging Kit
Current Clamps Buy it **
 i1010
AC/DC Current Clamp
 i2000 flex
AC Current Clamp
 i200s
AC Current Clamp
 i3000s
AC Current Clamp (3000 A)
 i410
AC/DC Current Clamp
Temperature Buy it **
 80PK-1
Bead Probe (Type K)
 80PK-27
Industrial Surface Temperature Probe
 80PK-3A
Surface Probe (Type K)
 80PK-8
Pipe Clamp Temperature Probe (Type K)
 80PK-9
General Purpose Probe (Type K)
 80PK-EXT
Extension Wire Kit (Type K)
 80T-150UA
Universal Temperature Probe (for DMMs)
 80TK
Thermocouple Module (Type K)
80AK-A Thermocouple Adapter
Search Fluke
ResourcesProducts
Find Resources

Home  |  Site Map  |  Fluke Corporation  |  Terms and Conditions  |  Privacy Statement  |  Disclaimer© 1995 - 2010 Fluke Corporation