Designed by electricians. Engineered by Fluke.

Compact true-rms meter for HVAC (heating ventilation air conditioning) troubleshooting. The Fluke 116 was specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.

Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage.

Built-in thermometer for HVAC applications Microamps to test flame sensors Low input impedance: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compact ergonomic design for one-handed operation Compatible with optional magnetic hanger (ToolPak™) CAT III 600 V safety rated

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Display	Digital:  6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating Temperature	-10 °C to + 50 °C
Storage Temperature	-40 °C to + 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery Life	400 hours typical, without backlight

Accuracy Specifications
DC millivolts	Range:  600.0 mV Resolution:  0.1 mV Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
DC volts	Range/Resolution:  6.000 V / 0.001 V Range/Resolution:  60.00 V / 0.01 V Range/Resolution:  600.00 V / 0.1 V Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
Auto volts	Range:  600.0 V Resolution:  0.1 V Accuracy:  2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1 true-rms	Range:  600.0 mV Resolution:  0.1 mV Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms	Range/Resolution:  6.000 V / 0.001 V Range/Resolution:  60.00 V / 0.01 V Range/Resolution:  600.0 V / 0.1 V Accuracy:  1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Continuity	Range:  600 Ω Resolution:  1 Ω Accuracy:  Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution:  600.0 Ω / 0.1 Ω Range/Resolution:  6.000 kΩ / 0.001 kΩ Range/Resolution:  60.00 kΩ / 0.01 kΩ Range/Resolution:  600.0 kΩ / 0.1 kΩ Range/Resolution:  6.000 MΩ / 0.001 MΩ Accuracy:  0.9 % + 1 Range/Resolution:  40.00 MΩ / 0.01 MΩ Accuracy:  1.5 % + 2
Diode Test	Range/Resolution:  2.000 V / 0.001 V Accuracy:  0.9% + 2
Capacitance	Range/Resolution:  1000 nF / 1 nF Range/Resolution:  10.00 μF / 0.01 μF Range/Resolution:  100.0 μF / 0.1 μF Range/Resolution:  9999 μF / 1 μF Range/Resolution:  100 μF to 1000 μF Accuracy:  1.9% + 2 Range/Resolution:  > 1000 μF Accuracy:  5% + 20%
LoZ capacitance	Range:  1 nF to 500 μF Accuracy:  10% + 2 typical
Temperature2 (Type-K thermocouple)	Range/Resolution:  -40 °C to 400 °C / 0.1 °C Accuracy:  1% + 102 Range/Resolution:  -40 °F to 752 °F / 0.2 °F Accuracy:  1% + 182
AC μamps true-rms (45 Hz to 500 Hz)	Range/Resolution:  600.0 μA / 0.1 μA Accuracy:  1.0% + 2
DC μamps	Range/Resolution:  600.0 μA / 0.1 μA Accuracy:  1.0% + 2
Hz (V or A input)2	Range/Resolution:  99.99 Hz / 0.01 Hz Range/Resolution:  999.99 Hz / 0.1 Hz Range/Resolution:  9.999 Hz / 0.001 Hz Range/Resolution:  50.00 Hz / 0.01 Hz Accuracy:  0.1% + 2

Notes:
1) All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
2) Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
3) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.
4) Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F

Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57" x 3.31" x 1.82")
Weight	550 g
Warranty	3 years