Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing.

The new Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands.

You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let alone be proactive about mechanical maintenance. The Fluke 810 Vibration Tester puts you one step ahead by using a simple step-by-step process to report on machine faults the first time measurements are taken, without prior measurement history. The combination of diagnoses, severity and repair recommendations help you make informed maintenance decisions and address critical problems first

Available at select distributors

Use the Fluke 810 Vibration Tester to:

Troubleshoot problem equipment and understand the root cause of failure Survey equipment before and after planned maintenance and confirm the repair Commission new equipment and ensure proper installation Provide quantifiable proof of equipment condition and drive investment in repair or replacement Prioritize and plan repair activities and operate more efficiently Anticipate equipment failures before they happen and take control of spare parts inventories Train new or less-experienced technicians and build confidence and skill across the team

The new Fluke 810 helps you locate and diagnose common mechanical problems and prioritize repair actions in three simple steps:

Vibration testing has never been easier.
The 810 asks for basic machine information you already know. Its onboard Info Feature gives you field tips for setting up and taking measurements like a pro.

Fluke 810 fits easily into your maintenance routine.
Use it to quickly troubleshoot problems or monitor machine conditions.

No more guessing your machine’s condition.
With the press of a button, the Fluke 810 identifies the root cause, its location, and how severe it is. Fix it right the first time.

Diagnostic specifications
Standard faults	Unbalance, looseness, misalignment and bearing failures
Analysis for	Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles
Machine rotational speed range	200 rpm to 12000 rpm
Diagnosis details	Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra

Electrical specifications
Ranging	Automatic
A/D converter	4 channel, 24 bit
Usable bandwidth	2 Hz to 20 kHz
Sampling	51.2 Hz
Digital signal processing functions	Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging
Sampling rate	2.5 kHz to 50 kHz
Dynamic range	128 dB
Signal to noise ratio	100 dB
FFT resolution	800 lines
Spectral windows	Hanning
Frequency units	Hz, orders, cpm
Amplitude units	in/sec, mm/sec, VdB (US), VdB* (Europe)
Non-volatile memory	SD micro memory card, 2 GB internal + user accessible slot for additional storage

General specifications
Dimensions (HxDxW)	18.56 cm x 7.00 cm x 26.72 cm (7.30 in x 2.76 in x 10.52 in)
Weight (with battery)	1.9 kg (4.2 lb)
Display	¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output Connections	Triaxial sensor connection 4 pin M12 connector Single axis sensor connection BNC connector Tachometer Connection Mini DIN 6 pin connector PC Connection Mini ‘B’ USB (2.0) connector
Battery	Battery type Lithium-ion, 14.8 V, 2.55 Ah Battery charging time Three hours Battery discharge time Eight hours (under normal conditions)
AC adapter	Input voltage 100 Vac to 240 Vac Input frequency 50/60 Hz
Operating system	WinCE 6.0 Core
Language Support	English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish
Warranty	Three-years

Environmental Specifications
Operating temperature	0 °C to 50 °C (32 °F to 122 °F)
Storage temperature	-20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity	10 % to 95 % RH (non-condensing)
Agency approvals	CHINA RoHS, CSA, CE, C TICK, WEEE
Electromagnetic compatibility	EN 61326-1:2006, EN 61010:1:2001 2nd ed.

Sensor specifications
Sensor type	Accelerometer
Sensitivity	100 mV/g (± 5 %, 25 °C)
Acceleration range	80 g peak
Amplitude nonlinearity	1 %
Frequency response	Z: 2 - 7,000 Hz ± 3dB X, Y: 2 - 5,000 Hz ± 3dB
Power requirement (IEPE)	18 V dc to 30 V dc, 2 mA to 10 mA
Bias output voltage	12 V dc
Grounding	Case grounded
Sensing element design	PZT ceramic / shear
Case material	316L stainless steel
Mounting	10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)
Output connector	4-Pin, M12
Mating connector	M12 - F4D
Non-volatile memory	TEDS 1451.4 compatible
Vibration limit	500 g peak
Shock limit	5000 g peak
Electromagnetic sensitivity, equivalent g	100 μg/gauss
Sealing	Hermetic
Temperature range	-50 °C to 120 °C (-58 °F to 248 °F) ± 7 %
Warranty	One-year

Tachometer specifications
Dimensions (DxW)	2.86 cm x 12.19 cm (1.125 in x 4.80 in)
Weight	96 g (3.4 oz) with cable
Power	Powered by 810 Vibration Tester
Detection	Laser Diode Class 2
Range	6.0 to 99,999 rpm
Accuracy	6.0 to 5999.9 rpm: ± 0.01 % and ± 1 digit 5999.9 to 99999 rpm: ± 0.05 % and ± 1 digit
Resolution	0.1 rpm
Effective range	1 cm to 100 cm (0.4 in to 39.27 in)
Response time	1 second (> 60 rpm)
Controls	Measure on/off transparent button
Interface	6 Pin Mini DIN
Cable length	50 cm (19.586 in)
Warranty	One-year
Tachometer accessories	Reflective tape: 1.5 cm x 52.5 cm (0.59 in × 20.67 in)

Viewer PC Software
Minimum hardware requirements	1 GB RAM
Operating system requirements	Windows XP, Vista