Ansur Downloads |
Ansur Executive V2.7.1 »
Main Application. |
Ansur ESA601 Plug-in V1.1.2 »
Ansur Plug-in module to control the ESA601 Electrical Safety Analyzer. |
Ansur Iagu Plug-in V1.6.1 »
Ansur plug-in module to control the Iagu Infusion Pump Tester. |
Ansur QA-1290 Plug-in V2.0.0 »
Ansur plug-in module to control the QA-1290 NIBP Simulator. |
Ansur QA-4X Plug-in V2.3.1 »
Ansur plug-in module to control the QA-40 Defibrillator Analyzer and/or the QA-45 Defibrillator/Transcutaneous Pacemaker Analyzer. |
Ansur QA-90 Plug-in V2.2.0 »
Ansur plug-in module to control the QA-90 Mk II Electrical Safety Analyzer. |
Ansur QA-ES Plug-in V1.4.5 »
Ansur plug-in module to control the QA-ES Mk II Electrosurgical Analyzer.
NOTE: Ansur Executive v2.7.0 or higher is required for this plug-in. |
Ansur QA-ST Plug-in V2.2.1 »
Ansur plug-in module to control the QA-ST Electrical Safety Analyzer. |
Ansur QA-VTM Plug-in V2.2.1 »
Ansur plug-in module to control the QA-VTM Ventilator Tester. |
Ansur BP Pump 2 Plug-in V1.0.3 »
Ansur plug-in module to control the BP Pump 2 Non-Invasive Blood Pressure Simulator. |
Ansur Impulse 4000 Plug-in V1.0.2 »
Ansur plug-in module to control the Impulse 4000 Defibrillator / Pacer Analyzer. |
Ansur QED 6 Plug-in V1.0.3 »
Ansur plug-in module to control the QED 6 Difibrillator Analyzer.
NOTE: Ansur Executive v2.7.0 or higher is required for this plug-in. |
Ansur Impulse 6000D/7000DP Plug-in V1.1.4 »
Ansur plug-in module to control the Impulse 6000D Defibrillator Analyzer and Impulse 7000DP Defibrillator / Pacemaker Analyzer. |
Ansur ESA620/Impulse 6000D/7000DP USB Serial Port driver »
Install this driver before using the Ansur Impulse 6000D/7000DP plug-in for the first time. Running this installation is very brief (1 second) and will enable your computer to assign a COM port number while the Impulse 6000D/7000DP is attached via a USB cable. When the cable connection is in place, the COM port assignment can be seen in the Windows Device Manager (listed under Ports) and also in the Ansur MLC list of available comports. |
Ansur ESA620 Plug-in V.1.0.4 »
Ansur plug-in module to control the ESA620 Electrical Safety Analyzer.
NOTE: This version of the ESA620 Plug-in requires ESA620 firmware v1.17 or later. |
Ansur ESA612 Plug-in v1.0.5 »
Ansur plug-in module to control the ESA612 Electrical Safety Analyzer.
NOTE: Ansur Executive v2.7.0 or higher is required for this plug-in. |
Ansur TNT 12000 Plug-in v1.1.3 »
Ansur plug-in module to control the TNT 12000 X-Ray Test Device. |
